Mailing List ArchiveSupport open source code!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]Re: ppp, pmcia and isdn question
- To: tlug@example.com
- Subject: Re: ppp, pmcia and isdn question
- From: Jonathan Q <jq@example.com>
- Date: Wed, 13 Sep 2000 01:33:17 +0900
- Content-Transfer-Encoding: 7bit
- Content-Type: text/plain; charset=us-ascii
- In-Reply-To: <004301c01cc2$5ff50460$052ad8cb@example.com>; from ulrike@example.com on Tue, Sep 12, 2000 at 10:32:44PM +0900
- References: <004301c01cc2$5ff50460$052ad8cb@example.com>
- Reply-To: tlug@example.com
- Resent-From: tlug@example.com
- Resent-Message-ID: <tgY1KD.A.HQB.O1lv5@example.com>
- Resent-Sender: tlug-request@example.com
Ulrike Schmidt (ulrike@example.com) wrote: Ulrike> I took the init string from the settings I use with windows but this did not Ulrike> solve the problem. You might want to look at the init strings here (although your problem, as others have noted, isn't an init string issue): http://home.gol.com/support/e/faq/init/ These are the recommended init strings from our dial-up support department. Of course, YMMV if you use them to connect anywhere but GOL :-) Jonathan
- References:
- Re: ppp, pmcia and isdn question
- From: "Ulrike Schmidt" <ulrike@example.com>
Home | Main Index | Thread Index
- Prev by Date: Re: new webpage: rikai.com
- Next by Date: Re: Displaying output from Computer on TV
- Prev by thread: Re: ppp, pmcia and isdn question
- Next by thread: Re: ppp, pmcia and isdn question
- Index(es):
Home Page Mailing List Linux and Japan TLUG Members Links