Mailing List ArchiveSupport open source code!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]Re: tlug: Running X with Riva128
- To: tlug@example.com
- Subject: Re: tlug: Running X with Riva128
- From: Scott Stone <sstone@example.com>
- Date: Sat, 3 Oct 1998 15:36:50 +0900 (JST)
- Content-Type: TEXT/PLAIN; charset=US-ASCII
- In-Reply-To: <3615BD28.FF011B78@example.com>
- Reply-To: tlug@example.com
- Sender: owner-tlug@example.com
On Sat, 3 Oct 1998, Takeshi Hakamada wrote: > Hi all, > > I have trouble with running XF86_SVGA 3.3.2 server with my STB > Verocity128 AGP (Nvidia Riva128). > > I created XF86Config file with xf86config command. > When I invoke X server with startx, screen goes black(black out?) and > I can't control my machine any more. I'm not sure if kernel is hanged > or not. After screen goes black, Keyboard is not respond. I have to > push reset switch to reboot. Of course I tried to get log message with > startx >&x.log, but I can't see any message in it. > Therefore I can't get clue for this strange problem. > > I searched web site about this problem and found that there is > incompatibility with ioport.c in kernel 2.0.x with gcc2.8.1 and it > cause Xserver to black out. Even though my system is RedHat 5.1 with > gcc2.7.2.3, I compiled kernel 2.1.122. But I still have same trouble. > > One of my friend has DELL PC with STB Velocity 128 and he can use > XF86_SVGA with no problem. So I suspect my MVP3 based mother board. I have a couple of these and I've never had any problems. I suspect your kernel revision might have something to do with it. Use a 2.0.35 kernel compiled with gcc 2.7.2.3, and a standard XFree86 3.3.2 SVGA server, and it will/should work. > > Does anybody have idea? Any help would be greatly appreciated. > If I can't run X with STB card, I immediately replace the video card. > > Following is my environment: > Mother board: EPoX MVP3 based card > CPU: K6-2 300MHz > VIDEO: STB Velocity 128 AGP(Riva128) Really, I have exactly the same motherboard, CPU, and video card at home -- works great for me (so it is possible to make it work :) ) -------------------------------------------------- Scott M. Stone <sstone@example.com, sstone@example.com> <sstone@example.com> Head of TurboLinux Development/Systems Administrator Pacific HiTech, Inc (USA) / Pacific HiTech, KK (Japan) http://www.pht.com http://armadillo.pht.co.jp http://www.pht.co.jp http://www.turbolinux.com --------------------------------------------------------------- Next Meeting: 10 October, 12:30 Tokyo Station Yaesu central gate Featuring the IMASY Eng. Team on "IPv6 - The Next Generation IP" Next Nomikai: 20 November, 19:30 Tengu TokyoEkiMae 03-3275-3691 --------------------------------------------------------------- Sponsor: PHT, makers of TurboLinux http://www.pht.co.jp
- Follow-Ups:
- Re: tlug: Running X with Riva128
- From: Takeshi Hakamada <hakamada@example.com>
- References:
- tlug: Running X with Riva128
- From: Takeshi Hakamada <hakamada@example.com>
Home | Main Index | Thread Index
- Prev by Date: Re: tlug: 1.Japanese hard- and software/2.Netscape
- Next by Date: Re: tlug: Running X with Riva128
- Prev by thread: tlug: Running X with Riva128
- Next by thread: Re: tlug: Running X with Riva128
- Index(es):
Home Page Mailing List Linux and Japan TLUG Members Links