Mailing List ArchiveSupport open source code!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]Re: tlug: STB Velocity 3D and XFree 3.3.2
- To: tlug@example.com
- Subject: Re: tlug: STB Velocity 3D and XFree 3.3.2
- From: Christopher Sekiya <chris@example.com>
- Date: Thu, 23 Jul 1998 09:41:53 +0900 (JST)
- Content-Type: TEXT/PLAIN; charset=US-ASCII
- In-Reply-To: <Pine.LNX.3.96LJ1.1b7.980722223750.24441C-100000@example.com>
- Reply-To: tlug@example.com
- Sender: owner-tlug@example.com
On Wed, 22 Jul 1998, Scott Stone wrote: > > I just installed TurboLinux on my desktop machine, happily throwing > > AccelleratedX out, which I used so far for my STB Velocity 3D video > > card (and which every couple of days messed up its font data forcing > > me to restart the server over again). > > > > > > I append the XF86Config below. The spec below uses a color depth of > > 16; I also tried 24 with similar results. BTW, I vaguely remember > > that I read somewhere that one should contribute new monitor specs. > > Does anybody know where to send it. > > 1152x900 isn't a 'real' mode, if I remember correctly. Just because it isn't a multiple of 320x2[04]0 doesn't make it a non-real (integer?) mode. That's a resolution common to Sun workstations, for instance. Manuel said: > > Scott once mentioned that the card uses the S3 ViRGE/VX, which is > > supported by XFree's SVGA server and probing also finds this chip, but > > in some video modes -- in particular in 1152x900, which I want to use > > -- starting the X servers freezes the machine and I have to reboot. Hmmm. Further: > > Does anybody have experience with this card? Interestingly, the > > higher resolution of 1280x1024 works (but the quality is not good -- I > > guess due to the lower refresh rate), so I'd like to use 1152x900, > > which worked with AccelleratedX. Huh. Sounds to me like the card doesn't like those particular CRTC timings. If you're not afraid to monkey with your XF86Config, I'll try to dig up some alternate timing values for you. > > Modeline "1152x900" 80.00 1152 1209 1399 1513 900 920 930 948 -hsync -vsync > > Modeline "1152x900" 95.00 1152 1193 1383 1521 900 920 930 948 -hsync -vsync *laugh* Comment out the second one and try again. When you run at 1280, which dot clock does it use? -- Chris -------------------------------------------------------------- Next Meeting: 8 August, Tokyo Station Yaesu central gate 12:30 featuring Linux on multiple platforms: i386, Sparc, PA-Risc, Amiga, SGI, Alpha, PalmPilot, ... Next Nomikai: September, 19:30 Tengu TokyoEkiMae 03-3275-3691 -------------------------------------------------------------- Sponsor: PHT, makers of TurboLinux http://www.pht.co.jp
- Follow-Ups:
- Re: tlug: STB Velocity 3D and XFree 3.3.2
- From: Scott Stone <sstone@example.com>
- Re: tlug: STB Velocity 3D and XFree 3.3.2
- From: "Manuel M. T. Chakravarty" <chak@example.com>
- References:
- Re: tlug: STB Velocity 3D and XFree 3.3.2
- From: Scott Stone <sstone@example.com>
Home | Main Index | Thread Index
- Prev by Date: Re: tlug: STB Velocity 3D and XFree 3.3.2
- Next by Date: Re: tlug: STB Velocity 3D and XFree 3.3.2
- Prev by thread: Re: tlug: STB Velocity 3D and XFree 3.3.2
- Next by thread: Re: tlug: STB Velocity 3D and XFree 3.3.2
- Index(es):
Home Page Mailing List Linux and Japan TLUG Members Links