Re: tlug: NEC AtermIW60 Init

[Scott Stone <sstone@example.com>]

On Sun, 10 May 1998 craigoda@example.com wrote:

> Hi,
> I've found a working AtermIW60 init string that works under Linux, kind 
> of..
> 	atq0v1x3$n1=1&d1
> 
> I'm connected now at 64Kbps.  This is fine for me, I don't think
> I'll use the 128Kbps feature too often unless I'm install 
> Linux over the network or downloading some new software.  Hmm,
> actually, maybe I will use it.  Anyway, I'm still having some
> problems with the serial port.  The chat script will hang
> at strange times.  
> 
> Sometimes it will hang when expecting the OK and just wait there.
> I wonder if this is a serial port speed issue?  I'm specifying
> 38400.   I wonder if this is a funny speed?  I almost feel that
> there is some serial buffer or something I need to clear out. 
> 
> /usr/sbin/pppd connect '/usr/sbin/chat -v -s "" atq0v1x3$n1=0 OK 
> ATD53617270 CONNECT ' user craig /dev/modem 38400 crtscts
> 

well, if you're using 64kbps, your port speed should be 115200, since it
has to be faster than the actual speed of the device, or...

you might want to also do:

setserial /dev/modem spd_vhi

--------------------------------------------------
Scott M. Stone <sstone@example.com, sstone@example.com>
               <sstone@example.com>
Linux Developer/Systems Administrator for Pacific HiTech, Inc. 
http://www.pht.com		http://armadillo.pht.co.jp
http://www.pht.co.jp	        http://www.turbolinux.com


--------------------------------------------------------------
Next Nomikai: 15 May Fri, 19:30 Tengu TokyoEkiMae 03-3275-3691
Next TLUG Meeting: 13 June Sat, Tokyo Station Yaesu gate 12:30
Featuring Stone and Turnbull on .rpm and .deb packages
--------------------------------------------------------------
Sponsor: PHT, makers of TurboLinux http://www.pht.co.jp