[tlug] ati tv wonder/ve does not work in FC5

["Hector Akamine" <akamine@example.com>]

Hi all,

I upgraded to Fedora Core 5, and my TV tuner card (ATI TV Wonder/VE)
stopped  working (it did perfectly in FC4). Kernel is
2.6.15-1.2054_FC5

I added the following line to /etc/modprobe.conf (that made the card
work in FC4):
options bttv card=64 tuner=2

dmesg shows the following:
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 2) at 0000:00:0c.0, irq: 16, latency: 64, mmio: 0xfdffd000
bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003
bttv0: using: ATI TV-Wonder VE [card=64,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=2
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 1-0060: All bytes are equal. It is not a TEA5767
tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 1-0060: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878_probe: card id=[0x31002], Unknown card.
bt878: probe of 0000:00:0c.1 failed with error -22

lsmod shows bttv and bt878 loaded. I'm not completely sure but I think
that in FC4 bt878 (presumably the reason of the problem) was not
listed. I googled to find information about the need to add options
when loading bt878, but couldn't find anything. Does anybody got a
similar TV tuner working in FC5?

Thanks in advance

Hector