[tlug] Connecting to Air H"

[Batara Kesuma <bkesuma@example.com>]

Hi,
I tried to connect to Air H" without any luck. My modem is USB modem,
Fujitsu AH-F401U, and I use Debian Sarge. I think it is detected
correctly. This is what I have in /proc/bus/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=32 #Cfgs=  1
P:  Vendor=04c5 ProdID=105b Rev= 1.00
S:  Manufacturer=Fujitsu Ltd.
S:  Product=AH-F401U
S:  SerialNumber=D2FE050
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm
E:  Ad=83(I) Atr=03(Int.) MxPS=  32 Ivl=255ms
I:  If#= 1 Alt= 0 #EPs= 4 Cls=0a(data ) Sub=00 Prot=32 Driver=cdc_acm
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

But when I configured the PPP connection with pppconfig, it couldn't
probe my modem. wvdialconf couldn't detect it as well. Here is the
result from wvdialconf:

Port Scan<*1>: S0   S1   S2   S3   S4   
ttyACM0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyACM0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyACM0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

I want to know if the modem is detected properly, and how to connect to
Air H"? Thank you in advance.

--bk