Mailing List ArchiveSupport open source code!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]Re: RH net configuration GUI tool buggy?
- To: tlug@example.com
- Subject: Re: RH net configuration GUI tool buggy?
- From: "Jean-Christian Imbeault" <jean_christian@example.com>
- Date: Fri, 13 Jul 2001 02:39:17 -0000
- Content-Type: text/plain; format=flowed
- Delivered-To: tlug@example.com
- List-Help: <mailto:tlug-request@example.comsubject=help>
- List-Post: <mailto:tlug@example.com>
- List-Subscribe: <mailto:tlug-request@example.comsubject=subscribe>
- List-Unsubscribe: <mailto:tlug-request@example.comsubject=unsubscribe>
- Old-Return-Path: <jean_christian@example.com>
- Reply-To: tlug@example.com
- Resent-From: tlug@example.com
- Resent-Message-ID: <vE11b.A.q6D.G9lT7@example.com>
- Resent-Sender: tlug-request@example.com
Right as always Jonathan! I was just guessing that the meaning and needed value of gatewaydev. For future reference where could I find a list of the options that go in the network config file and what the allowed values are? Jc >From: Jonathan Q <jq@example.com> >Reply-To: tlug@example.com >To: tlug@example.com >Subject: Re: RH net configuration GUI tool buggy? >Date: Fri, 13 Jul 2001 11:21:54 +0900 > >Jean-Christian Imbeault (jean_christian@example.com) wrote: > > > [root@example.com /root]# cat /etc/sysconfig/network > > NETWORKING=yes > > HOSTNAME=dev > > GATEWAYDEV=10.2.100.91 > > GATEWAY=10.2.100.91 > >There's a problem here. Your GATEWAYDEV should be set to >the name of your gateway device. I'm going to assume here >that your gateway devices is your first/only ethernet >card. You can even omit this parameter entirely if you >have only one network card in your machine. Set it >to: > >GATEWAYDEV="eth0" > >If 10.2.100.91 is your machine's IP address, this is >doubly borked. The gateway is not your machine,the >gateway is the next hop. My workstation is 203.216.0.50, and >my gateway is 203.216.0.1. This is my /etc/sysconfig/network: > >NETWORKING=yes >HOSTNAME=yamame.gol.ad.jp >GATEWAY=203.216.0.1 > >This is my /etc/sysconfig/network-scripts/ifcfg-eth0: > >DEVICE=eth0 >BOOTPROTO=static >BROADCAST=203.216.0.127 >IPADDR=203.216.0.50 >NETMASK=255.255.255.128 >NETWORK=203.216.0.0 >ONBOOT=yes > > >HTH, > >Jonathan > >----------------------------------------------------------------------- >Next Technical Meeting: Sat, July 14 13:30- ** Akasaka Kumin Center ** >Next Nomikai Meeting: Fri, Aug 10 19:30- Tengu Tokyo Eki-Mae >----------------------------------------------------------------------- >more info: http://www.tlug.gr.jp Sponsor: Global Online Japan > _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Home | Main Index | Thread Index
- Prev by Date: Re: RH 6.2 install causes screen to explode
- Next by Date: Apache unhappy with my Locale setting
- Prev by thread: Re: RH net configuration GUI tool buggy?
- Next by thread: japanese 106 kb not acting as such :)
- Index(es):
Home Page Mailing List Linux and Japan TLUG Members Links