Mailing List ArchiveSupport open source code!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]Re: re blackbox and icewm
- To: <tlug@example.com>
- Subject: Re: re blackbox and icewm
- From: "Scott Robbins" <scottro@example.com>
- Date: Thu, 12 Jul 2001 09:52:08 -0400
- Content-Transfer-Encoding: 7bit
- Content-Type: text/plain;charset="iso-8859-1"
- Delivered-To: tlug@example.com
- List-Help: <mailto:tlug-request@example.comsubject=help>
- List-Post: <mailto:tlug@example.com>
- List-Subscribe: <mailto:tlug-request@example.comsubject=subscribe>
- List-Unsubscribe: <mailto:tlug-request@example.comsubject=unsubscribe>
- Old-Return-Path: <scottro@example.com>
- References: <20010712080245.A769@example.com>
- Reply-To: tlug@example.com
- Resent-From: tlug@example.com
- Resent-Message-ID: <lYVVN.A.dIB.8taT7@example.com>
- Resent-Sender: tlug-request@example.com
----- Original Message ----- From: "Tobias Diedrich" <ranma@example.com> > Scott wrote: > > > Simply says Protocol "PS/2" > > That should be "IMPS/2" if you are using an Intellimouse as you say > below. I'm given the option to choose intellimouse during install--however, as I'm using a KVM, this has caused problems in the past (though haven't tried with 2.4 kernel.) > > > GPM works better with X if both use this device, and I tend to use > the text mode console a lot so I don't want to do without GPM. My other trouble (again, this is probably RH7.1J specific) is that if I allow gpm on startup then startup of cannaserver fails. Some days you can't win. :) Scott > >
- Follow-Ups:
- Re: re blackbox and icewm
- From: Jonathan Q <jq@example.com>
- References:
- Re: re blackbox and icewm
- From: Tobias Diedrich <ranma@example.com>
Home | Main Index | Thread Index
- Prev by Date: Re: RH 6.2 install causes screen to explode
- Next by Date: Re: re blackbox and icewm
- Prev by thread: Re: re blackbox and icewm
- Next by thread: Re: re blackbox and icewm
- Index(es):
Home Page Mailing List Linux and Japan TLUG Members Links