Mailing List Archive


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[tlug] fedora and emobile D01NE



Hi everyone,

I just bought an emobile D01NE card to use with my Fedora 7 laptop.  I
tried to configure using the following instructions:

http://wm-eddie.info/?p=123

and 

http://d.hatena.ne.jp/hayamiz/20070616/1181994636

But I am having trouble.  It does dial up and connect, but I cannot
browse the internet or anything.  I've noticed that /var/log/messages is
reporting "Could not determine remote IP address: defaulting to
10.64.64.64" (see log below).

Has anyone else been successful in getting this to work?  If so, what am
I doing wrong?  Do I need to send the PIN number to the server to obtain
the remote IP address, or is the PIN number just to activate the modem
on a windows system?

Here is my .wvdial.conf

[Dialer Defaults]
Modem = /dev/ttyACM0
ISDN = off
Modem Type = USB Modem
Baud = 460800
Init = ATZ
Init2 = ATH0E1
Init3 = 
Init4 = 
Init5 = 
Init6 = 
Init7 = 
Init8 = 
Init9 = 
Phone = *99***1#
Phone1 = 
Phone2 = 
Phone3 = 
Phone4 = 
Dial Prefix = 
Dial Attempts = 1
Dial Command = ATM1L3DT
Ask Password = off
Password = em
Username = em
Auto Reconnect = off
Abort on Busy = off
Carrier Check = on
Check Def Route = on
Abort on No Dialtone = on
Stupid Mode = off
Idle Seconds = 0
Auto DNS = on
;Minimize = on
;Dock = on
;Do NOT edit this file by hand!

Here are my log files:

/var/log/messages

Jan 12 06:01:10 subzero pppd[5622]: pppd 2.4.4 started by root, uid 0
Jan 12 06:01:10 subzero pppd[5622]: Using interface ppp0
Jan 12 06:01:10 subzero pppd[5622]: Connect: ppp0 <--> /dev/ttyACM0
Jan 12 06:01:10 subzero pppd[5622]: CHAP authentication succeeded
Jan 12 06:01:10 subzero pppd[5622]: CHAP authentication succeeded
Jan 12 06:01:14 subzero pppd[5622]: Could not determine remote IP
address: defaulting to 10.64.64.64
Jan 12 06:01:14 subzero pppd[5622]: local  IP address 60.254.197.139
Jan 12 06:01:14 subzero pppd[5622]: remote IP address 10.64.64.64
Jan 12 06:01:14 subzero pppd[5622]: primary   DNS address 60.254.193.158
Jan 12 06:01:14 subzero pppd[5622]: secondary DNS address 60.254.209.158
Jan 12 06:13:29 subzero pppd[5622]: Terminating on signal 15
Jan 12 06:13:29 subzero pppd[5622]: Connect time 12.3 minutes.
Jan 12 06:13:29 subzero pppd[5622]: Sent 23014 bytes, received 16042
bytes.
Jan 12 06:13:29 subzero pppd[5622]: Connection terminated.


gnome-ppp output:

[root@example.com ~]# gnome-ppp
WVCONF: /root/.wvdial.conf
GNOME PPP: Connecting...
GNOME PPP: STDERR: --> WvDial: Internet dialer version 1.54.0
GNOME PPP: STDERR: --> Cannot get information for serial port.
GNOME PPP: STDERR: --> Initializing modem.
GNOME PPP: STDERR: --> Sending: ATZ
GNOME PPP: STDERR: ATZ
GNOME PPP: STDERR: OK
GNOME PPP: STDERR: --> Sending: ATH0E1
GNOME PPP: STDERR: ATH0E1
GNOME PPP: STDERR: OK
GNOME PPP: STDERR: --> Modem initialized.
GNOME PPP: STDERR: --> Sending: ATM1L3DT*99***1#
GNOME PPP: STDERR: --> Waiting for carrier.
GNOME PPP: STDERR: ATM1L3DT*99***1#
GNOME PPP: STDERR: CONNECT
GNOME PPP: STDERR: --> Carrier detected.  Waiting for prompt.
GNOME PPP: STDERR: --> Don't know what to do!  Starting pppd and hoping
for the best.
GNOME PPP: STDERR: --> Starting pppd at Sat Jan 12 07:11:47 2008
GNOME PPP: STDERR: --> pid of pppd: 11298
GNOME PPP: STDERR: --> Using interface ppp0
GNOME PPP: STDERR: --> local  IP address 60.254.215.133
GNOME PPP: STDERR: --> remote IP address 10.64.64.64
GNOME PPP: STDERR: --> primary   DNS address 60.254.193.158
GNOME PPP: STDERR: --> secondary DNS address 60.254.209.158
GNOME PPP: STDERR: --> Terminating on signal 15
GNOME PPP: STDERR: --> Connect time 6.0 minutes.
GNOME PPP: STDERR: --> Disconnecting at Sat Jan 12 07:17:48 2008
GNOME PPP: STDOUT: Caught signal #2!  Attempting to exit gracefully...

Thank you for your help.

Cheers,
Matt

Attachment: signature.asc
Description: This is a digitally signed message part


Home | Main Index | Thread Index

Home Page Mailing List Linux and Japan TLUG Members Links