Mailing List ArchiveSupport open source code!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]Re: tlug: Debian install - mounting scsi zip
- To: tlug@example.com
- Subject: Re: tlug: Debian install - mounting scsi zip
- From: Tim Meggs <tim@example.com>
- Date: Fri, 21 Apr 2000 19:27:15 +0900
- Cc: tim@example.com
- Content-Transfer-Encoding: 7bit
- Content-Type: Text/Plain; charset=us-ascii
- In-Reply-To: Your message of "Fri, 21 Apr 2000 18:23:43 +0900 (JST)"
- References: <Pine.LNX.3.95.1000421181528.10218B-100000@example.com>
- Reply-To: tlug@example.com
- Sender: owner-tlug
From: Selva Nair <selva@example.com> Subject: Re: tlug: Debian install - mounting scsi zip Date: Fri, 21 Apr 2000 18:23:43 +0900 (JST) > That shouldn't be a problem as you have a running system. The device > cant be /dev/scd4, may be your "book" says /dev/sdc4", no? Anyway, as > you have only a cdrom and now the zip disk attached to the scsi > interface, the zip disk should be /dev/sda, isn't it. If it is the > second device it will be /dev/sdb etc... Dont know why, it seems zip > needs to be mounted on partition 4: so try I don't know is this applies to all systems, but when I look at /var/log/dmesg I can see all of the IDE and SCSI devices (with IDs) that were found at start up. [this of course assumes that the devices were powered on at start up] eg for my old 486 box: ... blah blah ... hda: WDC AC2540H, ATA DISK drive hdb: WDC AC2540H, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: WDC AC2540H, 515MB w/128kB Cache, CHS=1048/16/63 hdb: WDC AC2540H, 515MB w/128kB Cache, CHS=1048/16/63 ... blah blah .... aha152x: trying software interrupt, ok. scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $ scsi : 1 host. Vendor: FUJITSU Model: M1606S-512 Rev: 6236 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 1, lun 0 Vendor: PIONEER Model: CD-ROM DR-124X Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0 sr0: scsi3-mmc drive: 4x/4x xa/form2 cdda tray Uniform CDROM driver Revision: 2.54 SCSI device sda: hdwr sector= 512 bytes. Sectors= 2131992 [1041 MB] [1.0 GB] sda: sda1 sda2 Hope that helps some, tim :) -------------------------------------------------------------------- Next Nomikai Meeting: April 20 (Thu) Linux Conference 2000 Spring Ed. Next Technical Meeting: May 13 (Sat) 13:30 Temple University Japan * Topic: TBD -------------------------------------------------------------------- more info: http://www.tlug.gr.jp Sponsor: Global Online Japan
- References:
- Re: tlug: Debian install - mounting scsi zip
- From: Selva Nair <selva@example.com>
Home | Main Index | Thread Index
- Prev by Date: Re: tlug: Debian install - mounting scsi zip
- Next by Date: tlug: Re: stupid sh tricks
- Prev by thread: Re: tlug: Debian install - mounting scsi zip
- Next by thread: tlug: Re: stupid sh tricks
- Index(es):
Home Page Mailing List Linux and Japan TLUG Members Links