Mailing List Archive


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [tlug] Connecting to Air H"



>>>>> "Batara" == Batara Kesuma <bkesuma@example.com> writes:

    Batara> Port Scan<*1>: S0   S1   S2   S3   S4   
    Batara> ttyACM0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
    Batara> ttyACM0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
    Batara> ttyACM0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

The modem seems to be correctly detected, but it doesn't seem to
understand the AT command set.  Read the modem manual which should
tell how to configure it.

Install a program such as dip that allows you to talk to the modem
port directly and try configuring it by hand.

Read the modem manual to find out whether this "failed with XXXX baud
stuff" makes any sense; on USB it really doesn't AFAICT (USB runs at
megabaud speeds, not "2400", etc).  If the modem manual doesn't help,
bitch to the vendor.


-- 
Institute of Policy and Planning Sciences     http://turnbull.sk.tsukuba.ac.jp
University of Tsukuba                    Tennodai 1-1-1 Tsukuba 305-8573 JAPAN
               Ask not how you can "do" free software business;
              ask what your business can "do for" free software.


Home | Main Index | Thread Index

Home Page Mailing List Linux and Japan TLUG Members Links