Mailing List Archive


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [tlug] bandwidth statistic generaing program?





On 8/19/2002, "Jean-Christian Imbeault" <jean_christian@example.com>
wrote:


>cfgmaker is finding that my card is of type ethernetCsmacd (6)
>
>mii-tool however says I have fast ethernet:
>
>#mii-tool eth0
>eth0: negotiated 100baseTx-FD flow-control, link ok

OK, everything is basically fine, then.  Your card is auto-negotiating
full-duplex 100 mbps, which is what you want.

>By forcing MRTG to see it as 100 did you mean having MRTG think it's a
10
>but display that it is a 100, or did you mean actually have MRTG think
it's
>a 100 and mean it?

Whatever MRTG thinks it is, that's what it will display it as. It will
basically believe whatever it's told; if the card tells it "I'm ethernet"
it will graph it as such.  If you tell it "The card lies; it's fast ether"
then it will graph it as such.  So I mean having MRTG think it's a 100
(which it is) and mean it.

>Is cfgmaker is getting it's info from SNMP? Maybe I didn't configure my
>SNMPd properly or something ... more research :-)

Yes, it is.  Take a look at the cfgmaker code (perl).  I don't think you
have a problem with snmpd, since you are getting SNMP information.  Since
the card type information does not match the actual link speed, but your
other numbers are correct, that means the card is reporting itself as a
plain ethernet card regardless of whether it's in Fast Ether mode or not. 
It's not smart enough to say "Hey, I'm at 100 mbps, I should report myself
as type 62."

Jonathan

GPG key: DF12B4EF (5399 C834 3ABB C3AF 610C  5345 D5D6 E6EA DF12 B4EF)


Home | Main Index | Thread Index

Home Page Mailing List Linux and Japan TLUG Members Links